1.Specially designed screw and high-torque melt motor are used to facilitate the plasticization and molding of PET raw materials;
2.Equipped with an ejection device sufficient to meet the production of PET products;
3.The high-power motor-pump system makes the cycle period shorter and increases the production efficiency;
MODEL:HX(*)530PET
|
|||
TECHNICAL PARAMETER TABLE | |||
INJECTION UNIT | SCREW DIAMETER | Mm | 95 |
SCREW L/D RATIO | L/D | 24 | |
INJECTION CAPACITY (THEORETICAL) | cm3 | 3015 | |
INJECTION WEIGHT(PET) | g | 3317 | |
INJECTION PRESSURE | MPa | 149 | |
INJECTION RATE | g/s | 700 | |
PLASTICIZING CAPACITY | g/s | 95 | |
SCREW SPEED | rpm | 130 | |
CLAMPING UNIT | CLAMP FORCE | KN | 5300 |
OPEN STROKE | mm | 830 | |
MAX. MOULD HEIGHT | mm | 830 | |
MIN. MOULD HEIGHT | mm | 330 | |
SPACE BWTWEEN TIE-BARS (W×H) | mm | 860*810 | |
EJECTOR STROKE | mm | 230 | |
EJECTOR FORCE | KN | 181 | |
EJECTOR NUMBER | n | 17 | |
OTHERS | PUMP PRESSURE | MPa | 16 |
MOTOR POWER | KW | 55 | |
HEATING POWER | KW | 37.85 | |
MACHINE DIMENSION (L×W×H) | m | 9.05*2.14*2.61 | |
MACHINE WEIGHT | t | 21 | |
OIL TANK CAPACITY | L | 1156 |