The operating temperature of the injection molding machine should be controlled

The injection molding machine needs to master some techniques and skills during operation and use, and to avoid some blind spots and wrong operations. For example, it is very important to control the temperature of the injection molding machine correctly. In order to ensure the safety and production quality of the injection molding machine. During the production process, if the temperature of the injection molding machine rises abnormally, it will cause the machine to deform. Because the temperature is too high, it will cause the gap of the hydraulic part to change due to the different coefficient of thermal expansion, resulting in the possibility of system failure, and it will also cause hydraulic pressure. The accuracy of the system's own transmission is affected, which eventually leads to a decline in the working quality of the injection molding machine. The increase in the temperature of the injection molding machine will cause the viscosity of the lubricating oil to decrease, and the wear of the parts of the lubrication part will also greatly increase. In addition, too high temperature will cause the parts of the rubber structure to age faster, resulting in reduced sealing performance and leakage accidents. In summary, excessively high operating temperature of the injection molding machine will bring about a series of problems, so the staff should pay attention to avoiding the excessive temperature of the machine and equipment during operation, and control the working temperature. www.highsun-machinery.com